You have worked hard your whole life to acquire the things that you want and to be able to do the things you enjoy. Each person is different with regards to life goals and dreams, but the one thing that is similar to all is having the motivation to succeed in getting to a goal.
One such dream is to own a home and to begin putting down roots. The most common way to own a home is to buy one listed on the real estate market that you find comfortable, one that feels like home, and to find a good neighborhood that makes you happy. Another route to take is to design and build your exact dream home from the ground up, either with or without the assistance of a construction crew. Is this you? Then, you have probably already started your DIY home building research.
From the foundation to the ceilings, it is important for the entire structure of a house to be stable and a sturdy roof frame is a very important component. A proper roof frame can be constructed without the help of a professional contractor, but should you decide to do roof framing in Ambler yourself, you must be skilled enough to do the job and have all the right materials for the project.
The definition of roof framing is just as it sounds: a group of structural components joined together to provide necessary support as a large frame for the roof covering of a building, house, shed, or patio.
You are aware that you need to possess an all-around understanding of the steps to build one, and here we discuss some of the essential and common lumber needed for basic roof framing.
- First and foremost, when selecting the lumber for roof framing, inspect each individual piece thoroughly for brittleness, cracks, dents, knots, and other imperfections that could cause future structural problems and the need for partial or complete replacement.
- 2×8 Lumber – Commonly used for gable roofs. 2x8s are used for the ridge beam, the piece of wood that extends the length of the highest point of the roof.
- 2×6 Lumber – Rafters on the roof of a home are made from this size lumber, and so are the blocking pieces used to keep the rafters properly spaced when construction is in progress.
- 2×4 Lumber – Also needed for roof framing, 2×4 lumber is used on smaller roofs for the following: plates, gable studs, cripple studs, rafter, and beam supports.
- 4×8 Plywood: This size plywood is used as the protective covering of the roof. After this is placed, the felt roofing paper and shingles can be attached.
While planning and doing a DIY building project can be fun and exciting, keep in mind that roof framing in Ambler must only be done if you have the necessary skills and materials. If you don’t have 100 percent confidence in your skills or have questions about how to complete a framing job, don’t hesitate to contact a professional roofing contractor for help. Happy framing!